 |
|
|
| |
Fitting
Specifications
FITTING INSTRUCTIONS
FOR SINGLE SIDED DOORS
Please refer to diagrams below where needed.
Click on thumbnails to view larger pdf file formats or to print
out. You will need Acrobat
Reader installed on your computer to view click
here to download.
Sizes
 |
Diagram
1
 |
Diagram
2
 |
Diagram
3
 |
Track
- Check the
measurement A, B & C. Cut door stop length to suit the pelmet
height (C) 40 to 90mm as marked on the Trident bracket.
- Slide the
aluminium tracks over the door stop and hold up to the Trident
bracket. Then check that the length 'A' has a 1mm clearance.
- Place the
Trident bracket and track flush with the face of the unit and
screw fix with the screws provided.
Door
- With the
handle rail removed, place the left hand roller pin into the corresponding
hole in the left hand bracket (as listed above) then insert the
right hand lug into the right hand bracket at the same level as
the pin.
- Rotate the
roll clockwise (see right hand bracket detail) up to the recommended
rotations (as listed above), then, slide the Tambour over the
wheel and down into the aluminium tracks.
- The door
handle is now ready to have the handle rail refitted.
Fascia
- The fascia
can be screw fixed with screws provided through the pilot hole
in the back of the aluminium track.
- Note
Warranty void on spring if damage is due to tensioning in the
wrong direction.
|
|
|
|
